You are here: Building Output > Defining Export States
Close
Doc-O-Matic 10
Defining Export States

Doc-O-Matic exports all generic topic and most symbol topics to the output by default. There are two ways to change export states. You can:

  • Change the export status of each symbol and topic individually in the Content Manager.
  • Define export states by symbol types or by the documentation status and the accuracy of topics.

Each topic can have one of the following export states:

Image
Meaning
Exported
Not exported
Exported due to default setting
Not exported due to default setting
Not exported due to restricted export of group topics

There are several ways to determine which topics are exported to the output. You can set export states either for the whole project or for each configuration separately.

  1. On the Manage tab, in the Design group, click Mode .
  2. Make sure Apply Status Globally is turned on.
  3. Clear the Export State check boxes in front of each symbol and topic.
    Note: If you do not export a topic, its subtopics are not exported either.
  1. On the Manage tab, in the Design group, click Mode .
  2. Make sure either the Design or the TOC Lock mode is active.
  3. Click Apply Status Globally to turn it off.
  4. On the Project tab, in the Active Configuration group, select the configuration you want to change.
  5. Clear the Export State check box in front of each symbol and topic that you do not want to export in the current configuration.
  1. Doc-O-Matic exports all symbol types (functions, classes and types) except private class members by default. You can change these settings on the Export page separately for each configuration.
  2. On the Quick Access Toolbar, click Settings .
  3. Click the Configuration tab of the configuration you want to change.
  4. Select AutoDoc > Export > Default Member Selection.
  5. Define which class members appear in the current configuration. Note that clearing or selecting the Export check box next to the topic in the Content Manager can overwrite these settings.

Export, Default Member Selection

Copyright © 2000-2020 toolsfactory software inc. All rights reserved.