In Doc-O-Matic you can have one or more configurations for each output format. The default is one configuration for each output format. All configurations and paths to output directories are listed in the Project Manager. In a configuration all output specific options such as AutoDoc options and output format specific options for the set output format are saved. You can change output related options separately for all configurations and create multiple versions of your documentation.
All general options of your project such as options on the General Settings tab of the Settings and topic hierarchy information are stored in the project file. If you change these settings, changes apply to all configurations.
There can be several configurations for each output format. You can create a configuration for an internal documentation and a configuration for the documentation for your customer at the same time.
When you select Build All 
on the Build menu, Doc-O-Matic builds all configurations starting with the first one in the configuration menu.
To add a new configuration- Click Add Configuration
. - In the Name box, type a name for your configuration.
- In the Output Format box, select the output format you want to configure.
- Under Settings, do one of the following:
- Select Default Settings, to use the factory default settings for your configuration.
- Select Copy from current Configuration, to copy all compatible settings from the current configuration.
- The output format can not be changed for an existing configuration. To change the output format, you need to create a new configuration and copy the settings of the current configuration.
- In the Project Manager, select a configurations.
- Right-click, and the point to Configuration.
- Select Build Sooner
or Build Later 
. - You can synchronize the selected configuration on the Configuration menu with the selected Configuration tab in the Settings by clicking Synchronize
|
Copyright (c) 2000-2008 toolsfactory software inc. All rights reserved.
|